Abbas Banaie, Kosha
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Abdollahi Azghan, Mehdi
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Abdollah-Pour, Hassan
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Abdollah-zadeh, Amir
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Adli, Alireza
The Effect of Vascular Self-Healing Orientation on Healing Efficiency of Epoxy/Glass Fiber Composite [Volume 7, Issue 1, 2020, Pages 723-730]
Adli, Alireza
Experimental and Numerical Studies on the Effect of Hollow Glass Fiber Presence and Orientation on the Tensile Behavior of Epoxy/Glass Fiber Composite [Volume 7, Issue 2, 2020, Pages 881-890]
Agalari, Milad
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Agalari, Milad
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2021, Pages 1189-1196]
Aghamohammadi, Hamed
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Akbari Baghal, Amir Ebrahim
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2021, Pages 1255-1262]
Alhaji, Amir
In–situ synthesis of ZnFe2O4-Ce-doped/Carbon nanofiber composite via
electrospinning approach [Volume 7, Issue 2, 2020, Pages 961-968]
Alizadeh Alisaraei, Elaheh
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Amini, Amir
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2021, Pages 1243-1254]
Amini, Mohammad
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Amiri - Moghaddam, Afshin
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Ansari -Moghadam, Hamid
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Arab Maleki, Vahid
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Arasteh, Mahsa
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Assadi, Hamid
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Ayatollahi, Majid Reza
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
Azarafza, Reza
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Azizi, Hosna
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
B
Babaie, Javad
Design and Analysis of Opening Closure on the Composite Vessel Subjected to External Pressure [Volume 7, Issue 3, 2020, Pages 1000-1012]
Babazade, Abolfazl
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2021, Pages 1197-1206]
Bahrami, Bahador
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
Bahri-laleh, Naeimeh
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Batalebluie, Reza
Design and Analysis of Opening Closure on the Composite Vessel Subjected to External Pressure [Volume 7, Issue 3, 2020, Pages 1000-1012]
Behravesh, Amir Hossein
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2021, Pages 1271-1278]
Beigrezaee, Mohammad Javad
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
C
Chegeny, Mahdieh
Preparation and optimization of Chitosan-Montmorillonite nanocomposite formulations containing Curcumin [Volume 7, Issue 1, 2020, Pages 714-722]
D
Davar, Ali
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Davar, Ali
Numerical and experimental analyses of fracture carbon/epoxy composite pipe to steel cylinder with internal pressure [Volume 7, Issue 3, 2020, Pages 1095-1105]
Davoodi, Behnam
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2021, Pages 1263-1270]
Dehestani, Pooya
Design and Analysis of Opening Closure on the Composite Vessel Subjected to External Pressure [Volume 7, Issue 3, 2020, Pages 1000-1012]
Delavari, Maryam
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2021, Pages 1137-1144]
Didehban, Khadijeh
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
E
Ebrahimpour, Ali
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Eskandari Jam, Jafar
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Eskandari Jam, Jafar
Numerical and experimental analyses of fracture carbon/epoxy composite pipe to steel cylinder with internal pressure [Volume 7, Issue 3, 2020, Pages 1095-1105]
Eslami-Farsani, Reza
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Eslami-Farsani, Reza
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Eslami-Farsani, Reza
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Eslami-Farsani, Reza
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Eslami-Farsani, Reza
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Eslami-Farsani, Reza
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Esmaili, Ali
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2021, Pages 1235-1242]
Etemadi, Ehsan
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Ezati, Niloofar
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
F
Fallahnejad, Mehrdad
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Farahifar, Sina
Experimental investigation of mode I delamination growth in unidirectional E-glass/vinyl ester composites on acid aging [Volume 7, Issue 1, 2020, Pages 731-739]
Faraji, Alireza
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2021, Pages 1243-1254]
Farhadinia, Mahmood
Numerical and experimental analyses of fracture carbon/epoxy composite pipe to steel cylinder with internal pressure [Volume 7, Issue 3, 2020, Pages 1095-1105]
Fazlollah-Poor, Mohammadreza
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Forooghi, Ali
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2021, Pages 1177-1188]
G
Gazor, Mohammad Sajad
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Ghasemi, Fatemeh
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Ghasemi, Reza
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Ghavamaddini, Elahe sadat
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
Ghazavi, Mohammad Reza
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2021, Pages 1177-1188]
Golkar, Amir Hossein
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Golzar, Mohammad
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2021, Pages 1271-1278]
H
Hadad, Mohammadjafar
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2021, Pages 1197-1206]
Hadi Meshkenani, Mohammad
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Hafezi, Mohsen
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2021, Pages 1145-1152]
Haghighi Yazdi, Mojtaba
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2021, Pages 1171-1176]
Halimi-Khosroshahi, Hamed
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Hamzeloo, Seyed Reza
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Hasani, Saeed
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Hashemi, Ramin
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Heidari, Farshad
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Heidari, Farshad
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2021, Pages 1189-1196]
Heidari-Rarani, Mohammad
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
Heidari-shahmaleki, Ehsan
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Hemmati, Farkhondeh
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Hemmatnezhad, Milad
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2021, Pages 1163-1170]
Heydari Beni, Mohsen
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Heydari Beni, Mohsen
Numerical and experimental analyses of fracture carbon/epoxy composite pipe to steel cylinder with internal pressure [Volume 7, Issue 3, 2020, Pages 1095-1105]
Hosseini, Rouhollah
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Hosseini Kordkheili, Seyed Ali
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Hosseini Monfared, Hadiseh
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2021, Pages 1137-1144]
J
Jamshidi, Maryam
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2021, Pages 1271-1278]
K
Kadkhodaee, Mahdi
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Kakavand, Farshad
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Kalantar, Mahdi
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
Kalantar, Mehdi
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Kalantari, Shirin
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Kazemi, Reza
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Khavandi, Alireza
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Khoda-Rahmi, Hossein
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Khoshravan Azar, Mohammad Reza
The Effect of Vascular Self-Healing Orientation on Healing Efficiency of Epoxy/Glass Fiber Composite [Volume 7, Issue 1, 2020, Pages 723-730]
Khoshravan Azar, Mohammad Reza
Experimental and Numerical Studies on the Effect of Hollow Glass Fiber Presence and Orientation on the Tensile Behavior of Epoxy/Glass Fiber Composite [Volume 7, Issue 2, 2020, Pages 881-890]
Kiani, Ali
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Kohi habibi, Milad
In–situ synthesis of ZnFe2O4-Ce-doped/Carbon nanofiber composite via
electrospinning approach [Volume 7, Issue 2, 2020, Pages 961-968]
Korsavi-Kashani, Seyed Amirhossein
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
M
Maghsoudpour, Adel
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Mahdavinia, Hosna
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
Maleki, Ahmad
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2021, Pages 1255-1262]
Malekzadeh Fard, Keramat
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Malmorad, Mohsen
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2021, Pages 1227-1234]
Mashreghi, Alireza
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
Minaei, Masoud
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Mirjalili, Mohammad
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Mirmohammadi, Seyed Amin
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Moazami-Goudarzi, Mohammad
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Mohamadzadeh, Maryam
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2021, Pages 1263-1270]
Mohammadi, Younes
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Mohammadi-Aghdam, Mohammad
The Effect of Vascular Self-Healing Orientation on Healing Efficiency of Epoxy/Glass Fiber Composite [Volume 7, Issue 1, 2020, Pages 723-730]
Mohammadi-Aghdam, Mohammad
Experimental and Numerical Studies on the Effect of Hollow Glass Fiber Presence and Orientation on the Tensile Behavior of Epoxy/Glass Fiber Composite [Volume 7, Issue 2, 2020, Pages 881-890]
Mohammadimehr, Mehdi
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2021, Pages 1243-1254]
Mohammadi-Rovshandeh, Jamshid
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Mohammadkhani, Hasan
A multi-scale cubic model to calculate the elastic modules of the graphene/polymer nano composites [Volume 7, Issue 1, 2020, Pages 740-746]
Mohammad Sharifi, Ahmad Reza
Numerical and experimental analyses of fracture carbon/epoxy composite pipe to steel cylinder with internal pressure [Volume 7, Issue 3, 2020, Pages 1095-1105]
Moshrefzadeh-Sani, Hadi
A multi-scale cubic model to calculate the elastic modules of the graphene/polymer nano composites [Volume 7, Issue 1, 2020, Pages 740-746]
Mousavizade, Seyyed Mostafa
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
N
Naderi, Ghasem
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Najafi, Hamidreza
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Najafi, Moslem
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Najafpour Mollabashi, Mahdi
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2021, Pages 1171-1176]
Nakhaei, Mohammad Reza
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Navid, Tajbakhsh
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2021, Pages 1189-1196]
Niknejad, Abbas
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
O
Ojaghnezhad, Farzaneh
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
P
Payganeh, Gholamhasan
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Pourabdoli, Mehdi
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2021, Pages 1137-1144]
Pouria Azami-Googarchin, Pouria
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
R
Rafiaei, Seyed Mahdi
In–situ synthesis of ZnFe2O4-Ce-doped/Carbon nanofiber composite via
electrospinning approach [Volume 7, Issue 2, 2020, Pages 961-968]
Rahimi, Gholam-hossein
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Rahimi, Gholamhossein
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2021, Pages 1163-1170]
Rahimi, Gholamhossein
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2021, Pages 1217-1226]
Rahimi Pishbijari, Masoumeh
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Rahmani, Khosrow
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2021, Pages 1227-1234]
Rahmani, Mohsen
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Rahmatabadi, Davood
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Razifar, Maryam
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Refahi Oskouei, Amir
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Rezaeian-delouei, Mehdi
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
S
Sadeghi, Parisa
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
Sadjadi, Samahe
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Safarabadi, Majid
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2021, Pages 1171-1176]
Safarabadi, Majid
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2021, Pages 1197-1206]
Safari, Ebrahim
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Salamat-Talab, Mazaher
Experimental investigation of mode I delamination growth in unidirectional E-glass/vinyl ester composites on acid aging [Volume 7, Issue 1, 2020, Pages 731-739]
Salehi Vaziri, Hossein
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Salimi Nezhad, Iman
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2021, Pages 1271-1278]
Saraeian, Payam
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Sarfaraz, Roohollah
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2021, Pages 1227-1234]
Seifoddimi, Amir
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
Seraj, Rajab Ali
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Seyyed Afghahi, Seyyed Salman
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Shahbazi Karami, Javad
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Shahrajabian, Hamzeh
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Shakouri, Ehsan
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Sheikhi, Mohamad Morad
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Shelesh-Nezhad, Karim
The Effect of Vascular Self-Healing Orientation on Healing Efficiency of Epoxy/Glass Fiber Composite [Volume 7, Issue 1, 2020, Pages 723-730]
Shelesh-Nezhad, Karim
Experimental and Numerical Studies on the Effect of Hollow Glass Fiber Presence and Orientation on the Tensile Behavior of Epoxy/Glass Fiber Composite [Volume 7, Issue 2, 2020, Pages 881-890]
Shelesh-Nezhad, Karim
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Shelesh-Nezhad, Karim
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2021, Pages 1189-1196]
Shokrieh, Mahmood M.
Experimental investigation of mode I delamination growth in unidirectional E-glass/vinyl ester composites on acid aging [Volume 7, Issue 1, 2020, Pages 731-739]
Shokuhfar, Ali
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Shokuhfar, Ali
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Sommitsch,, Christof
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
T
Taheri-Behrooz, Fathollah
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2021, Pages 1235-1242]
Tajally, Mohammad
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Talezadehlari, Ali
Free vibration analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method [Volume 7, Issue 3, 2020, Pages 1120-1132]
Tavangar, Reza
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Toluei, Alireza
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Torabizadeh, Mohammad Amin
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2021, Pages 1153-1162]
V
Vafaeipour Sorkhabi, Ramin
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2021, Pages 1255-1262]
Vahdati, Mahdi
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2021, Pages 1207-1216]
Vakili -Tahami, Farid
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Velayati, Hamed Reza
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Y
Yarahmadi, Elham
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Yarmohammad Tooski, mehdi
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Yarmohammad Tooski, Mehdi
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2021, Pages 1145-1152]
Z
Zabihpoor, Mahmood
Design and Analysis of Opening Closure on the Composite Vessel Subjected to External Pressure [Volume 7, Issue 3, 2020, Pages 1000-1012]
Zakizadeh, Amir Mohamad
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Zamani, Amin
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Zanganeh Inaloo, Zanganeh Inaloo
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Zare, Maryam
In–situ synthesis of ZnFe2O4-Ce-doped/Carbon nanofiber composite via
electrospinning approach [Volume 7, Issue 2, 2020, Pages 961-968]
Zarei, Mehdi
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2021, Pages 1163-1170]
Zarei, Mehdi
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2021, Pages 1217-1226]
Zeinedini, Afshin
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]